How to use small glass tempering furnace safely and effectively

　　In the heating process of the small glass tempering furnace,if the glass is stuck in the glass fryer or the control system fails,the cause of the failure cannot be determined in an emergency,so some emergency treatment is needed.

　　Press the emergency stop button on the button box at the back door of the small glass tempering furnace,open the rear door wrench with one hand,and press the DC button on the button box with the other hand.

　　Observe the glass discharge,wait until the glass is discharged from the furnace body and release the DC button furnace door handle,then you can find the cause of the failure and deal with the follow-up work calmly.If there is no DC drive system,first open the door of the small glass tempering furnace,and then manually discharge the glass in the furnace.

　　In addition,during use,the heating furnace must follow a temperature setting mode where the upper setting temperature is higher than the lower 5℃-10℃,and the middle setting temperature is lower than the two ends 5℃-10℃,which can ensure the effective heating area The temperature difference of the glass out of the furnace is about 5℃,which basically guarantees the uniformity of the glass heating in the small glass tempering furnace.

　　According to the status of the small glass tempering furnace and combined with operating experience,the maintenance and protection projects and cycles of the automotive glass tempering furnace should be refined.Generally speaking,the practice of performing maintenance once every six months and comprehensive maintenance once a year has achieved good results.