Why glass tempering furnace manufacturers want to reduce power consumption

　　Why glass tempering furnace manufacturers want to reduce power consumption?Tempering furnaces reduce power consumption on the one hand to save economic expenses and reduce economic costs for enterprises,on the other hand,to respond to the national energy conservation and environmental protection call.

　　1.Adjustment of glass tempering furnace manufacturers to tempering furnace itself

　　In the heating furnace,the upper setting temperature should be higher than the lower 5℃-10℃,and the middle setting temperature is lower than the temperature setting mode of 5℃-10℃at both ends,which can ensure that the glass is discharged in the effective heating area.The temperature difference is about 5°C,and the uniformity of glass heating can be basically guaranteed.

　　2.Different process parameters need to be implemented for the original sheets of different glass tempering furnace manufacturers

　　In order to obtain the same product tempering strength,quality and surface temperature of the furnace glass under the process conditions of setting furnace temperature,quenching air pressure,cooling air pressure,transmission rate,quenching time,and cooling time for different original sheets,heating time is required has a difference.Therefore,to process original glass sheets from different manufacturers with small tempering furnaces,different process parameters must be implemented.

　　3.Improve the yield rate of the tempering process

　　The need for glass tempering furnace manufacturers to increase the yield of the tempering process is one of the most direct and effective measures to reduce the unit consumption of tempering electricity,which is also a key research topic for glass processing manufacturers.It not only requires the use of high-quality original float glass-less impurities in the glass,no large bubble stones,and good annealing quality,etc.,but also the processing quality of the glass corners,reasonable glass placement,tempering process parameters,equipment performance,etc.There are many requirements.